Please check your sizes carefully, not all 1:18 scale cars will fit, especially check the later F1 cars as they are now bigger than previous designs.
For that special 1:18 model car, one of our display cases will be very good at enhancing its display, as well as protecting it from ravages of time, like the UV light and the dust, (no more will you have to worry about the duster ripping the mirrors off), as well as meddling fingers. All of our showcase styles will make it safe, but easily accessible.
We also have some wall display cabinets that will enable you to display up-to four of them on the wall.
The acrylic display cover is fabricated from 3mm thick acrylic and supplied as a single piece, so there is no self assembly required. We have fabricated it from three pieces of acrylic, the front, top and back are made from one piece with 2 bends in the acrylic to form the three faces, the sides are then solvent welded onto it, finally they are machined and polished to provide a smooth professional finish. The acrylic cover will not only protect from over 90% of UV light, it will also protect your displayed item from dust and inquisitive fingers. The display cover is easily removable and can be lifted from the base to easily gain access to your displayed item.
The base of this display case is made from a single piece of 5mm thick acrylic, this gives a very minimalistic look. The base is available in a choice 3 colours, black, clear or white.
The base has a rebate machined around the outside edges, which creates a step that the display cover sits on. The internal sizes for this display case are listed below.
This display case has internal sizes of 325mm wide x 150mm deep x 128mm high, externally it measures approximately 332mm wide x 157mm deep x 136mm high.