Floating Shelf Display Case Fitting Instructions

PLEASE DO NOT USE A KNIFE OR SHARP OBJECT TO OPEN ANY OF THE PACKAGING

  1. With your floating shelf you will find (inside the back of the shelf) 2 shelf supports and a drilling template.
  2. Please put the display cover and floating shelf somewhere safe while you fit the shelf supports to your wall.
  3. Ignore the large holes in the template
  4. Using the template you will need to mark the small holes on your wall.
  5. We don’t supply instructions or fittings for fixing the shelf brackets to the wall, please take advice from a tradesman if you are unsure as to what fixings to use for your wall.
  6. Once the shelf supports are fixed securely to your wall you should be able to slide the floating shelf onto them.
  7. Depending on how flat your wall is, the shelf may be a tight fit or slightly loose fit, if it is too loose then we recommend putting a small amount of silicone sealant onto the end of the shelf supports and allowing it to set, to hold the shelf in place if you wish.
  8. Obviously if you have ordered the version with a display case on top then the 4 ‘prongs’ face up, to locate the display cover in place.